Note: you are viewing legacy manual.
Please click here for current version.
sipXecs is open software platform for Unified Communications focusing on voice. SIP Trunk configuration instructions below apply to the following sipXecs versions:
Static IP address (
a.b.c.d in our example above) of your sipXecs server will be added to GoTrunk service IP ACL (Access Control List) and outbound calls coming from that IP address will be accepted without requiring any further authentication (SIP username and password). This is the most efficient way of authenticating SIP calls.
Inbound calls to one of Telephone Numbers on your GoTrunk account will be sent directly to sipXecs public IP address. Since the calls will be coming from known
peer (IP address of SIP Trunking service
q.x.y.z in our example above) sipXecs will accept them without requiring any further authentication.
To configure sipXecs server to work with GoTrunk SIP trunk using IP authentication the following changes are required:
Follow steps below to add SIP Trunk:
Add new gateway...->
SIP Trunkfrom the menu.
eu.st.ssl7.netas Address (replace with
amn.st.ssl7.netif you want to use North America POP).
5060as Port number.
UDPas Transfer Protocol.
Follow steps below to configure Dialplan:
GoTrunkfrom the menu.